Home > Products > Dental Handpiece > Tealth M4/B2 LED Inner Water Slow Speed Kit Handpiece
              Tealth M4/B2 LED Inner Water Slow Speed Kit Handpiece
              • Tealth M4/B2 LED Inner Water Slow Speed Kit HandpieceTealth M4/B2 LED Inner Water Slow Speed Kit Handpiece
              • Tealth M4/B2 LED Inner Water Slow Speed Kit HandpieceTealth M4/B2 LED Inner Water Slow Speed Kit Handpiece
              • Tealth M4/B2 LED Inner Water Slow Speed Kit HandpieceTealth M4/B2 LED Inner Water Slow Speed Kit Handpiece
              • Tealth M4/B2 LED Inner Water Slow Speed Kit HandpieceTealth M4/B2 LED Inner Water Slow Speed Kit Handpiece

              Tealth M4/B2 LED Inner Water Slow Speed Kit Handpiece

              1020L-M4 LED inter1020L-Mnal low speed setModel:1020L-M4 Features:1. Including 1pcs of 4 holes air-motor, 1pcs of contra-angle with LED light,1pcs of straight-handpiece2. Internal Irrigation System ,perfect cooling, good helper for dentist3. LED Low Speed Kit, E-generator, self-illuminated4. Japanse......

              Send Inquiry

              Product Description

              Tealth M4/B2 LED Inner Water Slow Speed Kit Handpiece

              1020L-M4 LED inter1020L-Mnal low speed set
              Model:1020L-M4


              Tealth M4/B2 LED Inner Water Slow Speed Kit Handpiece
              Features:
              1. Including 1pcs of 4 holes air-motor, 1pcs of contra-angle with LED light,1pcs of straight-handpiece
              2. Internal Irrigation System ,perfect cooling, good helper for dentist
              3. LED Low Speed Kit, E-generator, self-illuminated
              4. Japanse bearings, long service life, more durable
              5. Push button chuck, there are FG bur head or CA bur head(Φ1.60mm/Φ2.35mm) for individual choice
              6. The LED bulb could be replaced, easy to operation 
              7.4 holes connector


              Tealth M4/B2 LED Inner Water Slow Speed Kit Handpiece

              Tealth M4/B2 LED Inner Water Slow Speed Kit Handpiece


              Instruction:
              After each treatment,Sterilizing handpiece in autoclave according to the following steps:
              1.Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution.
              2.Lubricate handpiece, each times drop two drops inside of air inlet pipe.
              3.Place into autoclaving pouch and mark.
              4.Autoclave the handpiece for 12 min. at 135ºC.
              5.For E-generator handpiece, we do not suggest that use ultrasonic to clean the handpiece


               

              Related Category

              Send Inquiry

              Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
              Click Refresh verification code

              Leave Your Message

              • Click Refresh verification code